TimberLife sealers and stains are excellent products to use on CCA preated wood. Arre you considering to build a deck but do not know where to start? Did you know that if you want a beautiful deck for years to come, it still needs taking care of? Here at Sabie Poles, we don’t’ only supply the best CCA TANALISED TREATED wood, but we also sell excellent timber aftercare products.
We are passionate about wood and believe that if you take care of your wood it’ll last a lifetime, thus lowering the demand for timber which sustains our forests for future generations to come.
In this article, we will go into detail about every TimberLife product we sell and what it is used for.
TimberLife Wood Products:
Timberlife Timbrite RFU
TIMBRITE RFU is a convenient ready-for-use product, carefully designed to disinfect and cleanse timber from fungal stains caused by mold fungi. Additionally, it effectively eliminates discoloration resulting from exposure to sunlight and the elements, while also removing dirt and grime.
- Remove any coating from your deck with a reputable paint stripper before applying Timbrite RFU.
- Apply Timbrite RFU liberally onto the wood surface.
- Brush it thoroughly to ensure even coverage.
- Leave it on the wood surface for approximately 5 to 10 minutes.
- Wash it off with clean water after the specified time.
- Store this product in a cool dark place, away from any strong oxidants and acids.
- Always keep the container tightly closed when not in use.
- Handle Timbrite RFU with caution and care as it is an alkaline solution.
- It can be irritating to the eyes and skin, so avoid direct contact.
- If it accidentally comes into contact with your eyes or skin, immediately wash it out with water.
- Be cautious with your clothes as Timbrite RFU can bleach them upon contact. It’s best to wear old clothes when handling this product.
- Timbrite RFU is intended for industrial and household use only.
- The product is available in various container sizes: 1L, 5L, 25L, and 200L.
Indeg is a TimberLife ready-to-use product that dissolves and removes old oily and waxy substances from previously finished wood, such as poles, doors, window frames, decks, wendy houses, furniture, etc. You can also use Indeg to remove oil stains from paving and concrete Indeg also cleans the timber from all forms of dirt and grime? Indeg is not a paint or varnish remover.
- Remove any previous wood coatings with a paint stripper before applying Indeg.
- Store Indeg in a cool and dark place, and always keep the container tightly closed.
- Keep Indeg away from open flames as it is highly flammable.
- Handle Indeg with care to avoid any accidents.
- In case of contact with eyes or skin, immediately wash it out with soap and water.
- Avoid spilling or splashing Indeg on painted surfaces.
- Indeg is limited to industrial and household uses only.
We supply Indeg in 1L, 5L, 25L, and 200L containers.
Timberlife CTX 108
This product is a ready-to-use, organic solvent-based solution designed specifically for the protection of seasoned timber. It contains a unique blend of insecticidal and fungicidal active ingredients, making it an effective surface treatment against wood borers, termites, discoloring fungi, and mold growth.
- Insecticidal and fungicidal surface treatment for seasoned timber
- Colorless protection against wood borer and termite attacks
- Guards against discoloring fungi and mold growth
- Provides long-term protection with a high level of insecticide
- Controls and eradicates wood-boring insects in infested timber
- Ensure the timber surface is clean and dry before application.
- Use either brush-on, dip, or spray methods to thoroughly cover all surfaces.
- The organic solvent aids in the penetration of the active ingredients into the wood structure, ensuring rapid drying.
- Once CTX 108 has dried, apply any desired coating/finish onto the treated wood surface.
- Use CTX 108 strictly following the label warnings, precautions, and directions.
- Store the product in closed containers below 40°C.
- Exercise extreme caution as CTX 108 is toxic – avoid ingestion, skin contact, and prolonged inhalation of vapors.
- After use, thoroughly wash hands and contaminated skin with soap and water.
- Keep away from open flames due to the highly flammable nature of the product.
- 1L steel drum
- 5L steel drum
- 25L steel drum
- 200L steel drum
CTX 108 provides reliable protection for seasoned timber, ensuring its longevity and resistance against harmful organisms. However, responsible handling and adherence to safety guidelines are crucial when using this product. Choose the appropriate size for your needs and safeguard your timber from potential threats with CTX 108 – the ultimate solution for wood preservation.
Introducing TimberLife’s exceptional organic solvent-based wood stain, a premium choice for wood enthusiasts seeking to accentuate the natural beauty of timber without obscuring its grain. Designed to be versatile for both interior and exterior applications, this wood stain offers remarkable UV protection for wood exposed to outdoor conditions. Say goodbye to weathering worries!
The wood stain boasts high-quality transparent iron oxides, ensuring that the timber’s grain remains visible and enhances its overall appeal. TimberLife understands the importance of choice, and therefore, the stain comes in a selection of eight exquisite shades of brown:
- Dark Oak
- Golden Brown
With such a range of shades, you can easily find the perfect match for your project.
Exclusively designed for exterior applications, TimberLife’s wood stain is the ideal solution for a variety of projects, including wooden decks, doors, fences, frames, facias, and more. However, please note that the stain should not be used on previously coated timber surfaces. Ensure that your surfaces are meticulously cleaned and stripped of any waxy oils or varnish-type coatings before applying the stain.
Using the product is a breeze! You have the flexibility to apply it using a brush, spray, or dip method. For best results, be sure to mix the contents thoroughly before application.
Experience the magic of TimberLife’s wood stain, where beauty meets protection, and your wood projects can stand the test of time with grace and elegance.
Khuni Sealer, the renowned contractor’s wood stabilizing oil, offers an exceptional solution for protecting raw wood against water ingress, surface degradation, and contamination. This remarkable oil/wax-based penetrating sealer is crafted with a high-quality blend of drying oils and water repellent wax components, ensuring deep penetration, stabilization, and nourishment of the wood. Acting as a transit stabilizer and protective sealer, it effectively prevents excessive checking and splitting of pre-manufactured timbers during building construction.
- Protects raw wood against water ingress, surface degradation, and contamination.
- High-quality blend of drying oils and water repellent wax components.
- Deeply penetrates, stabilizes, and nourishes the wood.
- Acts as a transit stabilizer, preventing excessive checking and splitting of pre-manufactured timbers.
Khuni Sealer from TimberLife serves multiple purposes. While it effectively stabilizes wood during construction, it can also be utilized as a final finish on wood surfaces. To achieve optimal results, apply a second, and preferably a third coat, 24 hours after the initial application. Please note that this product does not provide protection against fungal and insect attacks.
Before applying Khuni Sealer, ensure that the wood surface is free from previous coatings. Sanding the surface will help achieve the best results. Shake the contents of Khuni Sealer thoroughly before use. You have the option to brush, dip, or spray it onto your wood surface.
Keep in mind that Khuni Sealer is flammable; therefore, it is essential to avoid open flames during application. Additionally, store the product in a cool, dry place where temperatures do not exceed 40°C.
Looking to purchase Khuni Sealer? You can find it at Sabie poles, offering the product in convenient 1L, 5L, 25L, and 200L containers.
Upgrade your wood protection and finishing process with Khuni Sealer – the trusted choice of contractors and wood enthusiasts alike. Transform your raw wood into durable, stable, and long-lasting masterpieces with this exceptional wood stabilizing oil.
UltraDeck is a Timberlife solvent-borne sealer that penetrates the wood and builds to a protective, semi-gloss finish with good wear resistance. It is particularly suitable for use on exterior timbers such as wooden decks and walkways. Furthermore, it contains a unique blend of high-quality resins, drying oils, water repellent wax components and UV resistant transparent iron oxide pigments.
The ingredients of Ultradeck are dissolved in a formulated solvent carrier system to deeply penetrate, nourish and stabilize the wood. It also ensures protection against water ingress and UV degradation that is caused by sunlight exposure. Furthermore, UltraDeck dries to an aesthetic finish that enhances the natural color and beauty of the wood. It is available in the following shades of brown:
- Golden Brown
- Deep Brown
Restrictions include that you do not use this product on previously coated timber surfaces, you need to remove old coatings first. You can apply this product with the brush, dip or spray method. Of course, UltraDeck comes with caution, it is flammable so you should avoid open flames and storage space that exceeds temperatures of 40°C. Do we sell it? Of course, we do, you can find this product from TimberLife right here at Sabie Poles in 1L, 5L, 20L, 25L, and 200L containers.
It is a Timberlife penetrating solvent-borne sealer that provides a durable high sheen finish with good flexibility. UltraSeal is particularly suitable for use on exterior timbers such as wooden windows and doors. UltraSeal contains a unique blend of drying oils, high-quality resins, water repellent wax components, and UV resistant transparent iron oxide pigments.
These ingredients are dissolved in a formulated solvent carrier system to deeply penetrate, nourish and stabilize the wood and ensure protection against water ingress and UV degradation caused by sunlight exposure. It dries to an aesthetic finish that enhances the natural color and beauty of the wood. This product is available in the following shades of brown:
- Golden Brown
- Deep Brown
UltaSeal is not to be used on previously coated timber surfaces. You need to remove old coatings before any application. Ultraseal can be applied to wood by brush, dip or spray methods. Ultraseal is flammable, so you need to avoid any open flames and storage space that exceeds the temperatures of 40°C. Looking to buy this product? You can find it here at Sabie Poles in 1L, 5L, 20L, 25L, and 200L containers.
This product is known to be an interior/exterior solvent-borne stain additive. Furthermore, it is a organic solvent-based stain additives that consist of high-quality transparent iron oxides pigments. This product provides a non-leachable, UV resistant and long-lasting colors that do not hide the wood grain.
Timberlife Solv-Tints can be used for interior and exterior applications but are restricted to only be used with solvent-borne wood coating/finishing products. Solv-Tints need to be stored in spaces where the temperatures do not exceed 40°C. The containers should always be sealed, because this product is flammable. We sell it here at Sabie Poles in 36g, 180g, and 900g containers.
You know all there is to know about the wonderful products of TimberLife (Pty) Ltd. When you are in the market to buy any one of these products, feel free to pop in at our office or contact us and buy yourself the best wood care products on the South African market.